变约束条件下硬岩掘进机推进系统动态特性
全断面盾构机异质岩土掘进载荷等效模型研究
冗余驱动盾构机推进系统机液耦合模型及载荷特性分析
Hydraulic-mechanical coupling model and load characteristic analysis of shield thrust system with redundant drive
基于绝对节点坐标法的介电弹性体驱动柔性双层板结构动力学模型
A modeling study of welding stress induced by friction stir welding
复合岩土掘进时盾构机冗余驱动推进系统的分组策略
Coupling relationship between loads on cutterhead of tunnel boring machine and contact stiffness of gripper shoes and rocks
The ductile damage and fracture mechanisms analysis with random dispersion multivoids
基于多场载荷作用的天线舱结构优化设计
Compliant assembly variation analysis of thin-walled structures based on the absolute nodal coordinate formulation
基于诺顿等效系统功率流计算的多维振动传递特性研究
On analysis of the elasto-viscoplastic response of single crystals with anisotropic damage: constitutive modelling and computational aspects
影响轿车白车身扭转刚度的关键结构研究
基于几何耦合模型的多齿轮系统载荷均匀性分析
考虑隧道表面特性的硬岩全断面掘进装备撑靴接触界面刚度分析
Fretting Damage of Copper Sleeve Gasket in Gripper Cylinder of TBM Excavating in Complex Geological Structures
Equivalent load model on the cutterheads of TBM excavating in heterogeneous geologic strata
A stiffness-matching based evaluation approach for compliance of mechanical systems in shield tunneling machines
基于Khan-Huang模型高强度钢DP600率相关特性实验与本构模型研究
轿车白车身骨架低阶模态特性研究
Modeling deviation propagation of compliant assembly considering form defects based on basic deviation fields
Welding-induced Buckling Prediction for Large Thin-walled Cylindrical Structures with Non-uniform Stress Fields by Friction Stir Welding
Experimental and numerical analysis on load-sharing behavior of gear set with simultaneously actuated pinions
Out-of-plane distortion prediction of large thin-walled structures induced by friction stir welding
New stiffened plate elements based on the absolute nodal coordinate formulation
不同初始偏差下超大薄壁结构焊接变形分析
A new higher-order locking-free beam element based on the absolute nodal coordinate formulation
Compliant Assembly Variation Analysis of Scalloped Segment Plates With a New Irregular Quadrilateral Plate Element Via ANCF
基于模态分析法的车身NVH结构灵敏度分析
Auto-body NVH structure sensitivity analysis based on modal analysis method
夹具拘束下大型薄壁铝合金结构搅拌摩擦焊接变形特性
Dynamical Behavior of Redundant Thrusting Mechanical System in Shield Machines with Various Grouping Strategies
Evaluation of dynamic characteristics of tunnel boring machine excavating in uncertain geological parameters
含间隙转动副冗余约束机构的动力学特性
The Compliance Design on Thrust System of Shields Excavating in Various Geologic Conditions
Constitutive model on the description of plastic behavior of DP600 steel at strain rate from 10(-4) to 10(3) s(-1)
Dynamic Performance of Flexible Composite Structures with Dielectric Elastomer Actuators via Absolute Nodal Coordinate Formulation
Study on Motion Stability of Variable Cross-Section Flexible Beams Based on the Absolute Nodal Coordinate Formulation
板式塔盘降液板加强筋优化设计研究
薄板试样斜断口形成机制及损伤断裂过程分析
Design and Compliance Experiment Study of the Forging Simulator
基于绝对节点坐标法的钢索结构动力学模型与特性
Normal stiffness of tunnel surface contacting with thrusting boots of TBM with various surface characteristics
基于变密度法的大型天线系统支撑结构优化设计
Dynamic analysis of the rotating thin-walled structure via the absolute nodal coordinate formulation
Analysis of Residual Stresses Induced by Riveting Process and Fatigue Life Prediction
EFFECT OF SURFACE ROUGHNESS AND RESIDUAL STRESS INDUCED BY HIGH SPEED MILLING PROCESS ON SHORT CRACK GROWTH
Rate-dependent behavior and constitutive model of DP600 steel at strain rate from 10(-4) to 10(3) s(-1)
The Reconfiguration Design of Redundant Thrust of Shields Excavating in Various Geologic Conditions
复合地层中掘进的盾构机刀盘动态驱动转矩研究
Online Condition Monitoring of Gripper Cylinder in TBM Based on EMD Method
Dynamical behavior of redundant thrusting mechanical system in shield machines with various grouping strategies
硬岩掘进装备支撑系统界面接触刚度非线性特性
A LIE GROUP FORMULATION OF THE NEWTON-EULER EQUATIONS AND ITS APPLICATION TO ROBOT DYNAMICS
Optimization design on the distribution of rib in the plate column downcomer
Kinematic Stability of Variable Cross-section Beam with Large Deformation by using the Absolute Nodal Coordinate Formulation
Dynamics research on grouping characteristics of a shield tunneling machine's thrust system
Study on multi-dimensional vibration transmission performance based on vibration power flow calculation with norton equivalent system
基于刚度匹配的盾构掘进机械系统顺应性评价方法
Dynamic characteristic analysis of TBM tunnelling in mixed-face conditions
A Higher-Order Variable Cross-Section Viscoelastic Beam Element Via ANCF for Kinematic and Dynamic Analyses of Two-Link Flexible Manipulators
Effect of Surface Roughness and Residual Stress Induced by High Speed Milling Process on Short Crack Growth
Dynamic performance of over-constrained planar mechanisms with multiple revolute clearance joints
Experimental research on force transmission behavior of redundant driving thrusting system of shield machines with various grouping strategies
Design of Integrated Architecture of Web Service-Based Diagnosis System for TBM
基于壁板声学贡献分析的轿车乘员室声场降噪研究
Kinematic and dynamic behavior of hyperelastic plate with external force via absolute nodal coordinate formulation
Analysis for Dynamic Load Behavior of Shield Thrust System Considering Variable Boundary Constraints
Study on stiffness and deformation behavior of slewing bearing in shield machines
Assembly deformation prediction of riveted panels by using equivalent mechanical model of riveting process
盾构机复合岩土层掘进刀盘弯矩特性分析
Plastic rate-dependent experiment and constitutive model for dual phase steel 600
Design of integrated architecture of Web Service-Based diagnosis system for TBM
Bending moments study on the cutterheads of shield machines excavating in composition geologic strata
一种单自由度展开机构的设计与运动学分析
车身板件结构对汽车行车舒适性的影响
Non-linear behavior of normal contact stiffness of tunnel surface and supporting system of tunnel boring machines
The damage mechanisms of ductile materials based on multi-voids cell models
盾构机冗余驱动推进系统不同分组策略的动力传递特性实验研究
Vibration Performance Analysis for the Gripper Cylinder of Tunnel Boring Machine with Variable Stiffness
基于多孔洞体胞模型的韧性材料损伤机制
Analysis on load-sharing behavior of multiple gear system with geometric coupled model
多齿轮并联驱动系统动力稳定性
Residual stresses of al-li alloy sheets in automatic drilling riveting process
Dynamics Model and Performance of Steel Cable StructuresBased on ANCF
基于绝对节点坐标法的压电驱动复合结构动力学特性
Residual stress and fatigue behavior of riveted lap joints with various riveting sequences, rivet patterns, and pitches
A lie group formulation of the Newton-Euler equations and its application to robot dynamics
Numerical simulation of instability conditions in multiple pinion drives
复杂地质条件下TBM撑靴液压缸导向铜套微动损伤分析
Study on dynamic cutterhead driving torque of shield tunneling in composite strata
不确定性地质参数下硬岩掘进机动态特性与评价
飞行器对接框接触界面的等效模型及刚度特性
基于变形基的柔性薄壁结构公差分配方法
基于绝对节点坐标法的变截面梁动力学建模与运动变形分析
Study on the rate-dependent experiment and constitutive model of high strength steel dp600 based on Khan-Huang model
基于刚度和模态性能的轿车车身轻量化研究
Design and compliance experiment study of the forging simulator
基于数据驱动的运载火箭贮箱故障诊断方法研究
Study on automotive interior sound field refinement based on panel acoustic contribution analysis
盾构机主轴回转支承轴承刚度及变形特性研究
Compliant assembly variation analysis of sheet metal with shape errors based on primitive deformation patterns
Dynamic modeling and kinematic behavior of variable cross-section beam based on the absolute nodal coordinate formulation
基于绝对节点坐标法变截面柔性梁运动稳定性研究
Large-Amplitude Vibration Analysis of Shear Deformable Laminated Composite Cylindrical Shells with Initial Imperfections in Thermal Environments
TBM掘进机含间隙典型关节接触刚度模型及其特性
双相钢DP600塑性率相关效应试验及本构模型
基于绝对节点坐标法的柔性梁结构动态特性参数灵敏度分析